Assembling the Tropf-Blumat Sensors
- Unscrew the top parts and screw them back together underwater. Every Tropf-Blumat (sensor) must be filled completely with water.
- Leave the sensors filled with water and screwed together in the water for at least 15 minutes.
- This step is particularly important. Water the soil in all plant pots thoroughly several times before further assembly.
- Stick a Tropf-Blumat into the moist soil next to every plant (approx. 10-15 cm away from the plant). The clay cone must be covered completely by soil, press down loose soil.
- Connect the flexible drip tube to the T-piece or the end-piece and push it through the Tropf-Blumat. The end must protrude approx. 8 cm out of the Tropf-Blumat and should be near to the plant. Finally tighten the setting screws.
Tropf-Blumat User Manual
INTELLIGENT WATERING
DIE INTELLIGENTE BEWÄSSERUNG
L'ARROSAGE INTELLIGENT
L'IRRIGAZIONE INTELLIGENTE
LA IRRIGACIÓN INTELIGENTE
A IRRIGAÇÃO INTELIGENTE
DE INTELLIGENTE BEWATERING
DEN INTELLIGENTA BEVATTNINGEN
ÄLYKÄS KASTELUJÄRJESTELMÄ
DEN INTELLIGENTE VANDING
DEN INTELLIGENTE VANNINGEN
INTELIGETNE NAWADNIANIE
CHYTRÉ ZAVLAŽOVÁNÍ
INTELIGENTNÉ ZAVLAŽOVANIE
AZ INTELLIGENS ÖNTÖZÉS
SISTEM DE IRIGARE INTELIGENT
ИНТЕЛИГЕНТНОТО НАПОЯВАНЕ
ΤΟ ΕΞΥΠΝΟ ΠΟΤΙΣΜΑ
INTELLIGENTNE KASTMINE
VIEDĀ APŪDEŅOŠANA
IŠMANUSIS LAISTYMAS
INTELIGENTNI SISTEM ZA ZALIVANJE
INTELIGENTNO ZALIJEVANJE
INTELIGENTNO ZALIVANJE
AKILLI SULAMA
ИНТЕЛЛЕКТУАЛЬНЫЙ ПОЛИВ
インテリジェントな自動給水システム